Drei Bond 8662

Adhesive Bonding Technology

Drei Bond 8662 is a two-component methacrylate adhesive, which is characterized in particular by its greatly reduced odour. In addition, both components are less dangerous than similar products and are therefore only given the “exclamation mark” as a pictogram. These properties make Drei Bond 8662 much more pleasant for the user.

The adhesive is low-viscosity, has high strength and is impact-modified. It is ideal for bonding very different materials with different thermal expansion and adheres very stably to a variety of surfaces such as e.g. B. plastics (ABS, PC, etc.), metals (steel, aluminum, etc.), ceramics, wood and fiber composites. Rapid curing at room temperature also qualifies Drei Bond 8662 for use with complex and sensitive components.

Product Info
Drei Bond GmbH
Adhesive Bonding Technology

Drei Bond is a system provider in the following sectors: Highly effective adhesives and sealing materials, oiling and greasing.


Size of application area
mm²-/mm³range - precision parts
cm²-/cm³ range - workpieces
System solutions
PVC (harder perfomance)
PVC (softer perfomance)
steel (blasted SA 2,5)
Glass & Ceramic Materials
Wood & Timber
solid timber - untreated
2-part systems
2-part systems
Curing mechanisms
room temperature curing
Pot life @ +20/23°C - Minimum / minutes
1-5 min
(Mixed) viscosity
high viscosity
Packaging unit
customized packaging
Temperature resistance <0°C (approx.)
from -40°C
Temperature resistance >0°C (approx.)
to +120°C
Gap filling properties
≤ 5mm
Sh-D 61 to 80
Colour and colour fastness
colour spectrum bright
Application Types
dot application
line, bead application

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable system that may be available. SUBSTRATEC gives no guarantee that the system suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant manufacturer or supplier. See for further information Terms of Use.