Born2Bond™ Repair

Bonding Technology

Born2Bond™ Repair is a patented, gap-filling, instant adhesive and repair product with excellent adhesion to a very broad range of materials and surfaces. Repair is ideal for instant bonding and repairing, because it combines the strength of a structural adhesive with the speed of an instant adhesives. A tough polymer is achieved within a hardening time of under 10 minutes and the gel consistency enables application in any orientation.

Key features

  • Fixture time in 60 seconds*
  • Hardens in 5-10 minutes*
  • Instant adhesion with high bonding strength
  • Low volume shrinkage : 4.3 %
  • Fills gaps of any volume
  • Bonds a large range of materials**
  • Machinable once hardened
  • Sandable
  • Paintable
  • Impact resistant
  • Gel consistency for precise application
  • Non sagging for vertical applications
Product Info
>Bostik SA Bostik SA
Bonding Technology

Bostik is one of the largest adhesive and sealant companies. Worldwide, we employ some 5,000 people in 50 countries across five continents. Our customers come from diverse markets, most notably the industrial manufacturing, construction and consumer sectors.

Features

Size of adhesion surface
mm²-/mm³range
cm²-/cm³ range
Thermoplastics
PA
PA (PA 6)
PA (PA 6.6)
PA (PA 12)
PBT
PC
PES
PET
PEEK
PMMA
PPS
PUR (lower degree of cross-linking)
PVC (harder perfomance)
PVC (softer perfomance)
Thermoplastics (low surface energy)
PE-HD (High Density)
PE-LD (Low Density)
PP
POM
PTFE (Teflon®)
Thermoplastics (Styrenes)
ABS
ASA
EPS
PS
SAN
SB
Thermosetting Plastics
EP
MF
PF
PUR (higher degree of cross-linking)
Thermosets (Composites)
CRP
BMC
FR4
GRP
Elastomers
EPM/EPDM
NBR
neoprene
NR
SBR
SI
Metals - susceptible to corrosion (active)
cast iron
steel (blasted SA 2,5)
Metals - anti corrosive surfaces (passive)
aluminium
chromium
gold
nickel
magnets
steel - chromated
steel - stainless
steel - galvanised
zinc (also galvanized materials)
Glass & Ceramic Materials
glass
ceramics
porcelain
Wood & Timber
veneer
cork
solid timber - untreated
MDF - medium density fiberboard
OSB - oriented strand board
chipboard
Paper & Cardboard
alu-coated materials
paper
Fabrics & Leather
leather
2-part systems
cyanacrylate
Solvents
solvent-free
Sector classification
manufacuting industry
Temperature resistance <0°C (approx.)
from -40°C
Temperature resistance >0°C (approx.)
to +80°C
Shore-D
Sh-D 61 to 80
Deformation capability
≤ 30%
Gap filling properties
≤ 30mm
Colour of adhesive film
colour spectrum bright
white
vehicle exteriors
car mirrors
spoilers
bumpers
Curing mechanisms
chemical curing
Pot life @ +20/23°C - Minimum / seconds
6-10 sec
Pot life @ +20/23°C - Minimum / minutes
6-15 min
(Mixed) viscosity
high viscosity
Packaging unit
small packaging unit (can, tube, etc.)
cartridge (1- or 2-part)
Degree of automation
hand-operated application
semi automatic
fully automated
Application Types
dot application
line, bead application
Liquid Adhesives
2-part systems

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable adhesives that may be available. SUBSTRATEC gives no guarantee that the adhesive suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant adhesive manufacturer or supplier. See for further information Terms of Use.