Drei Bond 9160

Bonding Technology

Drei Bond 9160 is an elastic, one component MS-Polymer. Sealant and adhesive for bonding vehicle bodywork, containers and vehicle manufacture, air conditioning and heating equipment, metal work etc.

  • Good adhesion to glass, many kinds of metal (zinc, aluminium, steel), varnished and primed materials, wooden materials, duroplastics, thermoplastics (except PE, PP, PTFE) and mineral substrates.
  • Good resistance to humidity and weathering,
  • Good temperatureresistance according to oil storage investigation(1500 h –150°C
Product Info
Drei Bond GmbH
Bonding Technology

Drei Bond is a system provider in the following sectors: Highly effective adhesives and sealing materials, oiling and greasing.

Features

Size of adhesive area
mm²-/mm³range
cm²-/cm³ range
1-part systems
1-part STP - silane modified polymers
Product Labelling
solvent-free
without hazardous label
Temperature resistance <0°C (approx.)
from -40°C
Temperature resistance >0°C (approx.)
to +120°C
Shore-A
Sh-A 41 to 60
Deformation capability
> 300%
Colour of adhesive film
colour spectrum dark
black
Curing mechanisms
moisture curing
(Mixed) viscosity
pasty
Packaging unit
cartridge (1- or 2-part)
hobbock/ drum
Sector classification
manufacuting industry
Degree of automation
manuel application
semi automatic (hand-operated)
Application Types
dot application
line, bead application
surface coating
Liquid Adhesives
1-part systems
High Performance Plastics
PPS
PSU
PEEK
PES
Thermoplastics
PA
PA (PA 6)
PA (PA 6.6)
PA (PA 12)
PBT
PC
PET
PMMA
PUR (lower degree of cross-linking)
PVC (harder perfomance)
PVC (softer perfomance)
Thermoplastics (Styrenes)
ABS
ASA
EPS
PPE
PS
SAN
SB
XPS (rigid foam)
Thermosetting Plastics
EP
HPL
MF
PF
PUR (higher degree of cross-linking)
UP
Metals - anti corrosive surfaces (passive)
aluminium
steel - stainless
zinc (also galvanized materials)
Glass & Ceramic Materials
glass

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable system that may be available. SUBSTRATEC gives no guarantee that the system suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant manufacturer or supplier. See for further information Terms of Use.