epple 200/S free

Bonding Technology

epple 200/s free from toluene is an one-component contact adhesive on the basis of chloroprene.

  • Contact adhesive
  • Highly elastic adhesive film
  • Free from toluene

Application: Thanks to its wide bonding spectrum, epple 200/S free from toluene is mainly used for the bonding of plastics among each other or with metals, as well as for the bonding of rubber parts.

Product Info
>E. Epple & Co. GmbH E. Epple & Co. GmbH
Bonding Technology

Features

Size of application area
cm²/³ range
m²/³ range
Thermoplastics
PA
PA (PA 6)
PA (PA 6.6)
PA (PA 12)
PBT
PC
PES
PET
PMMA
PPS
PSU
PUR (lower degree of cross-linking)
PVC (harder perfomance)
PVC (softer perfomance)
Thermoplastics (Styrenes)
ABS
ASA
EPS
PPE
PS
SAN
SB
XPS (rigid foam)
Thermosetting Plastics
EP
HPL
MF
PF
PUR (higher degree of cross-linking)
UP
Thermosets (Composites)
CRP
BMC
FR4
GRP
SMC
Elastomers
CR
NBR
NR
SBR
Metals - susceptible to corrosion (active)
bronze
cast iron
copper
magnesium
brass
steel (blasted SA 2,5)
Metals - anti corrosive surfaces (passive)
aluminium
plumb
chromium
gold
nickel
platinum
silver
silicium
steel - chromated
steel - stainless
steel - galvanised
titanium
zinc (also galvanized materials)
tin
Glass & Ceramic Materials
emaille
glass
ceramics
mosaic & tiles
porcelain
Construction Materials & Substrates
asphalt
bitumen
insulating materials
joints & crack repair
gypsum & plasterboard
infrastructure - concrete & rock
artificial stones
natrual stones
final floor layer - tile
final floor layer - laminate/lino/pvc
final floor layer - parquet
subfloor - concrete/screed/cement
walls & ceilings
Wood & Timber
veneer
HPL laminate
CPL laminate
cork
solid timber - primed, painted, coated
solid timber - untreated
MDF - medium density fiberboard
multiplex board
OSB - oriented strand board
parquet
Paper & Cardboard
dispersion-coated cardboards
foils
FR2 - synthetic resin bonded paper
coated cardboards
grey board
paper
PE-coated boards
corrugated cardboard
Fabrics & Leather
felt
jute
leather
fleece
1-part systems
hotmelts (thermopl. rubber)
Solvents
solvent-borne
Sector classification
manufacuting industry
Temperature resistance <0°C (approx.)
from -30°C
Temperature resistance >0°C (approx.)
to +60°C
Colour of adhesive film
colour spectrum bright
yellow
Curing mechanisms
pressure-senitive process
Pot life @ +20/23°C - Minimum / minutes
1-5 min
(Mixed) viscosity
high viscosity
Packaging unit
small packaging unit (can, tube, etc.)
hobbock/ drum
Liquid Adhesives
1-part systems

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable adhesives that may be available. SUBSTRATEC gives no guarantee that the adhesive suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant adhesive manufacturer or supplier. See for further information Terms of Use.