epple 4551

Bonding Technology

epple 4551is an one-component adhesive on the basis of Polyvinylacetate.

  • Adhesive with many uses
  • Rapid bondings, even with absorbing substrates
  • The adhesive film remains transparent and elastic

Application: mainly used for the rapid bonding of different plastics and metals where the glued joint is exposed to low mechanical strain. It is suitable for the rapid bonding on absorbing materials, e. g. paper or paper board.

Product Info
>E. Epple & Co. GmbH E. Epple & Co. GmbH
Bonding Technology

Features

Size of application area
mm²/³range
cm²/³ range
Thermoplastics
PA
PA (PA 6)
PA (PA 6.6)
PA (PA 12)
PBT
PC
PES
PET
PMMA
PPS
PSU
PUR (lower degree of cross-linking)
PVC (harder perfomance)
PVC (softer perfomance)
Thermoplastics (Styrenes)
ABS
ASA
EPS
PPE
PS
SAN
SB
XPS (rigid foam)
Thermosetting Plastics
EP
HPL
MF
PF
PUR (higher degree of cross-linking)
UP
Thermosets (Composites)
CRP
BMC
FR4
GRP
SMC
Elastomers
CR
EPM/EPDM
NBR
NR
SBR
Metals - susceptible to corrosion (active)
bronze
cast iron
copper
magnesium
brass
steel (blasted SA 2,5)
Metals - anti corrosive surfaces (passive)
aluminium
plumb
chromium
gold
nickel
platinum
silver
silicium
steel - chromated
steel - stainless
steel - galvanised
titanium
zinc (also galvanized materials)
tin
Glass & Ceramic Materials
emaille
glass
ceramics
mosaic & tiles
porcelain
Wood & Timber
veneer
HPL laminate
CPL laminate
cork
solid timber - primed, painted, coated
solid timber - untreated
MDF - medium density fiberboard
multiplex board
OSB - oriented strand board
parquet
Paper & Cardboard
dispersion-coated cardboards
foils
FR2 - synthetic resin bonded paper
coated cardboards
grey board
paper
corrugated cardboard
Fabrics & Leather
felt
jute
leather
fleece
1-part systems
dispersion adhesives
Solvents
solvent-borne
Sector classification
manufacuting industry
Temperature resistance <0°C (approx.)
from -30°C
Temperature resistance >0°C (approx.)
to +80°C
Colour of adhesive film
crystal clear
Curing mechanisms
pressure-senitive process
Pot life @ +20/23°C - Minimum / seconds
31-59 sec
(Mixed) viscosity
medium viscosity
Liquid Adhesives
1-part systems

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable adhesives that may be available. SUBSTRATEC gives no guarantee that the adhesive suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant adhesive manufacturer or supplier. See for further information Terms of Use.