epple 5601

Bonding Technology

epple 5601 s a two-component adhesive on the basis of epoxy and aminic hardeners.

  • Low viscosity
  • Long pot life

Application: Used for the bonding of metals and plastics. The product is applied where a rather rigid adhesive joint of medium toughness is to be achieved

Product Info
>E. Epple & Co. GmbH E. Epple & Co. GmbH
Bonding Technology

Features

Size of application area
cm²/³ range
m²/³ range
Thermosetting Plastics
EP
Thermosets (Composites)
FR4
Metals - susceptible to corrosion (active)
bronze
cast iron
copper
magnesium
brass
steel (blasted SA 2,5)
Metals - anti corrosive surfaces (passive)
aluminium
plumb
chromium
gold
nickel
platinum
silver
silicium
steel - chromated
steel - stainless
steel - galvanised
titanium
zinc (also galvanized materials)
tin
Glass & Ceramic Materials
emaille
glass
ceramics
ceramic (techno-)
mosaic & tiles
porcelain
Construction Materials & Substrates
asphalt
bitumen
insulating materials
joints & crack repair
gypsum & plasterboard
infrastructure - concrete & rock
artificial stones
natrual stones
final floor layer - tile
final floor layer - laminate/lino/pvc
final floor layer - parquet
subfloor - concrete/screed/cement
walls & ceilings
Anchoring & Fixing
chemical anchoring systems
screw thread - through hole
screw thread - pocket hole bore
chemical screw retention
2-part systems
epoxy resins
Solvents
solvent-free
Sector classification
manufacuting industry
Temperature resistance <0°C (approx.)
from -30°C
Temperature resistance >0°C (approx.)
to +150°C
Shore-D
Sh-D 61 to 80
Colour of adhesive film
colour spectrum dark
black
Curing mechanisms
room temperature curing
Pot life @ +20/23°C - Minimum / hours
3-4 h
(Mixed) viscosity
high viscosity
Liquid Adhesives
2-part systems

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable adhesives that may be available. SUBSTRATEC gives no guarantee that the adhesive suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant adhesive manufacturer or supplier. See for further information Terms of Use.