E. Epple & Co. GmbH

Bonding Technology

Hertzstr. 8
DE-71083 Herrrenberg
Germany

Products

>epple-easy 5612-new epple-easy 5612-new
Bonding Technology

epple 5612-new is a two-component, solvent-free adhesive on the basis of epoxy.

  • Easily mixing and applicating
  • No manual mixing
  • Low viscosity
  • Can be used as an adhesive and cast resin

Anwendung: epple-easy 5612-new is transparent, so that it can be used for applications where the adhesive joint remains visible.For larger quantities, the product can also be applied by means of a dispenser.

>epple K 20 R epple K 20 R
Bonding Technology

epple K20R is a fast-curing adhesive on the basis of a thermoplastic caoutchouc.

  • Wide range of application possibilities
  • Pressure-sensitive adhesive or as laminating adhesive
  • High adhesive strength

Application: Being applied as contact adhesive, epple K 20 R bonds the most different materials, e. g. paper, textiles, leather, rubber, wood and PU-foam. It is particularly suitable for the adhesion of profiles and mould articles out of solid rubber and expanded rubber, as well as for the bonding of elastomers to metal surfaces.

>epple 5851 epple 5851
Bonding Technology

epple 5851 is a two-component contact adhesive on the basis of chloroprene.

  • Contact adhesive
  • Highly elastic adhesive film
  • Wide bonding spectrum

Application: It is mainly used for the bonding of plastics among each other or with metals, as well as for the bonding of rubber parts.

>epple 200/S free epple 200/S free
Bonding Technology

epple 200/s free from toluene is an one-component contact adhesive on the basis of chloroprene.

  • Contact adhesive
  • Highly elastic adhesive film
  • Free from toluene

Application: Thanks to its wide bonding spectrum, epple 200/S free from toluene is mainly used for the bonding of plastics among each other or with metals, as well as for the bonding of rubber parts.

>epple 4551 epple 4551
Bonding Technology

epple 4551is an one-component adhesive on the basis of Polyvinylacetate.

  • Adhesive with many uses
  • Rapid bondings, even with absorbing substrates
  • The adhesive film remains transparent and elastic

Application: mainly used for the rapid bonding of different plastics and metals where the glued joint is exposed to low mechanical strain. It is suitable for the rapid bonding on absorbing materials, e. g. paper or paper board.

>epple-easy 5610-new epple-easy 5610-new
Bonding Technology

epple 5610-new is a two-component adhesive on the basis of epoxy.

  • For easy mixing an applicating
  • High elastic
  • Autmatic mixing with dual cartridge

Application: This adhesive is particularly suitable for the bonding of metals among each others, as well as for the bonding of metal with plastic. In cured condition it still provides high elasticity.

>epple 5601 epple 5601
Bonding Technology

epple 5601 s a two-component adhesive on the basis of epoxy and aminic hardeners.

  • Low viscosity
  • Long pot life

Application: Used for the bonding of metals and plastics. The product is applied where a rather rigid adhesive joint of medium toughness is to be achieved

>epple-bond 8213 epple-bond 8213
Bonding Technology

epple 8213 is a solvent-free, one-component adhesive on the basis of cyanoacrylate.

  • High viskosity
  • Cures within a few seconds
  • Tough adhesive joint

Application: Suitable for the bonding of porous and absorbent assembly components, as well as for metals, plastics, rubber and other elastomers. It is of good aging resistance and provides high adhesive strength on the various assembly components.

>epple-easy 5711 epple-easy 5711
Bonding Technology

epple 5711 is a two-component, solvent-free on the basis of polyurethane.

  • Low-viscous adhesive
  • Applied by means of a dual cartridge
  • Easy to applicate
  • High adhesive strength to metals, light metals, non-ferrous metals, paper, cardboard and wood

Application: Mainly used for the bonding of combinations out of metal and plastic, as well as for the fastening and protection of electronic components in circuit boards.

>epple-bond 8212 epple-bond 8212
Bonding Technology

epple 8212 is a solvent-free, one-component adhesive on the basis of cyanoacrylate.

  • Cures within a few seconds
  • Tough adhesive joint
  • Low viscosity

Appliaction: Suitable for the bonding of metal, plastics, rubber and other elastomers. It is of good aging resistance and provides high adhesive strength on the various assembly components.