epple-easy 5610-new

Bonding Technology

epple 5610-new is a two-component adhesive on the basis of epoxy.

  • For easy mixing an applicating
  • High elastic
  • Autmatic mixing with dual cartridge

Application: This adhesive is particularly suitable for the bonding of metals among each others, as well as for the bonding of metal with plastic. In cured condition it still provides high elasticity.

Product Info
E. Epple & Co. GmbH
Bonding Technology

At epple we are passionate about our tradition of offering a wide range of industrial sectors the sealing compounds, adhesives and casting resins they need for optimal technical solutions.

Features

Size of adhesive area
mm²-/mm³range
cm²-/cm³ range
m²-/m³ range
2-part systems
2-part epoxy resins
Product Labelling
solvent-free
Temperature resistance <0°C (approx.)
from -20°C
Temperature resistance >0°C (approx.)
to +80°C
Shore-A
Sh-A 81 to 100
Shore-D
Sh-D 61 to 80
Colour of adhesive film
colour spectrum bright
Curing mechanisms
room temperature curing
Pot life @ +20/23°C - Minimum / minutes
16-30 min
(Mixed) viscosity
pasty
Packaging unit
cartridge (1- or 2-part)
Sector classification
manufacuting industry
Degree of automation
manuel application
semi automatic (hand-operated)
Application Types
dot application
line, bead application
Liquid Adhesives
2-part systems
Thermosetting Plastics
EP
Thermosets (Composites)
FR4
Metals - susceptible to corrosion (active)
bronze
cast iron
copper
magnesium
brass
steel (blasted SA 2,5)
Metals - anti corrosive surfaces (passive)
aluminium
chromium
gold
nickel
plumb
platinum
silver
silicium
steel - chromated
steel - stainless
steel - galvanised
titanium
zinc (also galvanized materials)
tin
Glass & Ceramic Materials
emaille
glass
ceramics
mosaic & tiles
porcelain
Mineral (Construction) Materials
asphalt
bitumen
insulating materials
joints & crack repair
gypsum & plasterboard
concrete & cement
artificial stones
natrual stones
Anchoring & Fixing
chemical anchoring systems
screw thread - through hole
screw thread - pocket hole bore
chemical screw retention

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable system that may be available. SUBSTRATEC gives no guarantee that the system suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant manufacturer or supplier. See for further information Terms of Use.