Jowat-Hightherm® 230.00

Bonding Technology

The hot melt adhesive Jowat-Hightherm® 230.00 can be used for assembly operations. It has a long open time, high hot tack, good adhesion and heat resistance, as well as resistance to oxidation and colour stability in the melt.

Product Info
JOWAT SE
Bonding Technology

Features

Thermoplastics
PA
PA (PA 6)
PA (PA 6.6)
PA (PA 12)
PC
PES
PET
PMMA
PUR (lower degree of cross-linking)
PVC (harder perfomance)
PVC (softer perfomance)
Thermoplastics (low surface energy)
PE-HD (High Density)
PE-LD (Low Density)
PP
Thermoplastics (Styrenes)
ABS
ASA
EPS
PS
XPS (rigid foam)
Thermosetting Plastics
HPL
PUR (higher degree of cross-linking)
Thermosets (Composites)
CRP
GRP
Elastomers
EPM/EPDM
Metals - susceptible to corrosion (active)
cast iron
steel (blasted SA 2,5)
Metals - anti corrosive surfaces (passive)
aluminium
steel - chromated
steel - stainless
steel - galvanised
Glass & Ceramic Materials
glass
ceramics
mosaic & tiles
Construction Materials & Substrates
gypsum & plasterboard
final floor layer - parquet
final floor layer - carpet
Wood & Timber
veneer
HPL laminate
CPL laminate
cork
solid timber - primed, painted, coated
solid timber - untreated
MDF - medium density fiberboard
multiplex board
OSB - oriented strand board
parquet
chipboard
Paper & Cardboard
coated cardboards
grey board
paper
PE-coated boards
corrugated cardboard
Fabrics & Leather
felt
jute
leather
fleece
1-part systems
hotmelts EVA, PA, PO, acrylate
Sector classification
construction & craft
Colour of adhesive film
colour-stable
yellow
Curing mechanisms
melting process
Pot life @ +20/23°C - Minimum / seconds
11-30 sec
(Mixed) viscosity
pasty
Packaging unit
sticks/ blocks/ granulate
customized packaging
Degree of automation
fully automated
Liquid Adhesives
1-part systems

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable adhesives that may be available. SUBSTRATEC gives no guarantee that the adhesive suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant adhesive manufacturer or supplier. See for further information Terms of Use.