ergo.® 1452

Bonding Technology

ergo.® 1451 is a medium viscous, toughened and impact resistant two-component system, which is suitable for all applications where glass, ceramic, metal or a combination of these materials is involved.

ergo.® 1451 bonds even materials with different thermal elongation coefficients. Its excellent physical properties allow the use under difficult conditions as for instance thermal and climatic cycles. The product may be used only in combination with the accelerator ergo.® 1093. The product cures within approx. 20 seconds (at 23°C) It may be used also for magnetic materials (ferrites).

Advantages

  • Excellent compromise between hardness, strength and impact resistance
  • Especially usable for the bonding of car rear-mirrors with the wind shield
  • Good flowing behaviour
  • 100 % reactive content
  • Extreme fast curing properties with accelerator ergo.® 1093
Product Info
>Kisling AG Kisling AG
Bonding Technology

Features

Thermosetting Plastics
EP
MF
PF
UP
Thermosets (Composites)
CRP
BMC
FR4
GRP
SMC
Elastomers
CR
Metals - susceptible to corrosion (active)
bronze
cast iron
copper
magnesium
brass
steel (blasted SA 2,5)
Metals - anti corrosive surfaces (passive)
aluminium
plumb
chromium
gold
nickel
magnets
platinum
silver
silicium
steel - chromated
steel - stainless
steel - galvanised
titanium
zinc (also galvanized materials)
tin
Glass & Ceramic Materials
emaille
ceramics
ceramic (techno-)
mosaic & tiles
porcelain
Paper & Cardboard
alu-coated materials
2-part systems
methylmethacrylate
Solvents
solvent-free
Sector classification
manufacuting industry
Temperature resistance <0°C (approx.)
from -55°C
Temperature resistance >0°C (approx.)
to +120°C
Shore-D
Sh-D 61 to 80
Colour of adhesive film
colour spectrum bright
yellow
Curing mechanisms
room temperature curing
Pot life @ +20/23°C - Minimum / seconds
11-30 sec
(Mixed) viscosity
pasty
Packaging unit
small packaging unit (can, tube, etc.)
Application Types
dot application
Liquid Adhesives
2-part systems

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable adhesives that may be available. SUBSTRATEC gives no guarantee that the adhesive suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant adhesive manufacturer or supplier. See for further information Terms of Use.