ergo.® 1665

Bonding Technology

ergo.® 1665 is a non-sagging, two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies.

Combined at a 10:1 ratio, it has a working time of 3 to 6 minutes. 50% of final strength (@23°C) will be achieved already within 15 to 18 minutes. ergo® 1665 is mainly used as an universal grade for industrial applications where composites are involved. Normally it does not require any surface preparation.

Advantages

  • Good adhesion to a wide range of materials
  • Non-dropping paste
  • Bridges gaps up to 10 mm
  • Excellent resistance against dynamic loads
  • Resistant against outside conditions and humidity
  • 100% reactive compound
Product Info
>Kisling AG Kisling AG
Bonding Technology

Features

Thermoplastics
PA
PA (PA 6)
PA (PA 6.6)
PC
PES
PMMA
PUR (lower degree of cross-linking)
PVC (harder perfomance)
PVC (softer perfomance)
Thermoplastics (Styrenes)
ABS
ASA
PPE
PS
SAN
Thermosetting Plastics
EP
MF
PF
PUR (higher degree of cross-linking)
UP
Thermosets (Composites)
CRP
BMC
FR4
GRP
SMC
Elastomers
NBR
Metals - susceptible to corrosion (active)
bronze
cast iron
copper
magnesium
brass
steel (blasted SA 2,5)
Metals - anti corrosive surfaces (passive)
aluminium
plumb
chromium
gold
nickel
magnets
platinum
silver
silicium
steel - chromated
steel - stainless
steel - galvanised
titanium
zinc (also galvanized materials)
tin
Glass & Ceramic Materials
emaille
glass
ceramics
ceramic (techno-)
mosaic & tiles
porcelain
Wood & Timber
solid timber - untreated
MDF - medium density fiberboard
Paper & Cardboard
alu-coated materials
Anchoring & Fixing
chemical anchoring systems
screw thread - through hole
screw thread - pocket hole bore
chemical screw retention
2-part systems
methylmethacrylate
Sector classification
manufacuting industry
Temperature resistance <0°C (approx.)
from -55°C
Temperature resistance >0°C (approx.)
to +120°C
Deformation capability
≤ 300%
Gap filling properties
≤ 10mm
Curing mechanisms
room temperature curing
Pot life @ +20/23°C - Minimum / minutes
1-5 min
(Mixed) viscosity
pasty
Packaging unit
cartridge (1- or 2-part)
Application Types
dot application
line, bead application
Liquid Adhesives
2-part systems

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable adhesives that may be available. SUBSTRATEC gives no guarantee that the adhesive suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant adhesive manufacturer or supplier. See for further information Terms of Use.