ergo 3120

Bonding Technology

Neutral cure one-component RTV silicone formulated for use in a wide range of industrial applications.

ergo 3120 Super RTV Silicone RED is low odour and non-corrosive because the by-products of cure are chemically neutral. The product is characterized by its resistance to extreme heat exposure, mechanical strength and resistance to vibration as well as its excellent weather and chemical resistance.

Typical applications

ergo 3120 Super RTV Silicone RED is an adhesive and sealant that achieves optimum seals, protection and adhesion to a wide variety of materials. It is typically used in situations that require bonds or seals to surfaces in heating or cooling devices, or in applications where electronic components require protection from external forces vibration, impact, moisture and chemicals): Bonding and sealing parts in household appliances (e.g. ovens and ceramic hobs), seals in electronic components (e.g. accumulators), seals in automotive applications (e.g. intake manifolds, oil pumps, oil pans, camshaft bearing covers, gearbox covers, front covers, exhaust manifolds, exhaust flanges, engine covers and flanges).

Product Info
Kisling AG
Bonding Technology

Kisling is a leading manufacturer of high-quality adhesives and sealants for almost every line of industry- electronics, mechanical engineering, pump and valve construction and mobility.

Features

Size of adhesive area
mm²-/mm³range
cm²-/cm³ range
m²-/m³ range
1-part systems
silicone (RTV-1)
Temperature resistance <0°C (approx.)
from -60°C
Temperature resistance >0°C (approx.)
above +250°C
Shore-A
Sh-A 21 to 40
Deformation capability
> 300%
Colour of adhesive film
colour spectrum dark
red
Curing mechanisms
room temperature curing
(Mixed) viscosity
thixotropic
solid
Packaging unit
small packaging unit (can, tube, etc.)
cartridge (1- or 2-part)
Sector classification
manufacuting industry
Degree of automation
manuel application
Application Types
dot application
line, bead application
Liquid Adhesives
1-part systems
High Performance Plastics
PTFE (Teflon®)
PPS
PSU
PEEK
PES
Thermoplastics
PA
PA (PA 6)
PA (PA 6.6)
PA (PA 12)
PBT
PC
PET
PMMA
PUR (lower degree of cross-linking)
PVC (harder perfomance)
PVC (softer perfomance)
Thermoplastics (low surface energy)
PE-HD (High Density)
PE-LD (Low Density)
PP
POM
Thermoplastics (Styrenes)
ABS
ASA
EPS
PPE
PS
SAN
SB
XPS (rigid foam)
Thermosetting Plastics
EP
HPL
MF
PF
PUR (higher degree of cross-linking)
UP
Thermosets (Composites)
CRP
BMC
FR4
GRP
SMC
Elastomers
CR
EPM/EPDM
NBR
NR
SBR
SI
Metals - susceptible to corrosion (active)
bronze
cast iron
copper
magnesium
brass
steel (blasted SA 2,5)
Metals - anti corrosive surfaces (passive)
aluminium
chromium
gold
nickel
plumb
magnets
platinum
silver
silicium
steel - chromated
steel - stainless
steel - galvanised
titanium
zinc (also galvanized materials)
tin
Glass & Ceramic Materials
emaille
glass
ceramics
ceramic (techno-)
mosaic & tiles
porcelain
Mineral (Construction) Materials
asphalt
bitumen
insulating materials
engineered stone
joints & crack repair
gypsum & plasterboard
concrete & cement
artificial stones
natrual stones
Wood & Timber
veneer
HPL laminate
CPL laminate
cork
solid timber - primed, painted, coated
solid timber - untreated
MDF - medium density fiberboard
multiplex board
OSB - oriented strand board
parquet
chipboard
Paper & Cardboard
acetatelaminate
alu-coated materials
dispersion-coated cardboards
foils
FR2 - synthetic resin bonded paper
coated cardboards
grey board
OPP-laminate
paper
PE-coated boards
UV-coated boards
corrugated cardboard
Fabrics & Leather
felt
jute
leather
fleece
Anchoring & Fixing
chemical anchoring systems
screw thread - through hole
screw thread - pocket hole bore
chemical screw retention

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable system that may be available. SUBSTRATEC gives no guarantee that the system suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant manufacturer or supplier. See for further information Terms of Use.

Information Desk