ergo.® 5923

Bonding Technology

Medium to high viscous and nearly odourless glue, which shows less blooming or whitening than normal grades. Suitable for bonding of jewellery or crystal into carrier and recommended, wherever visible traces of glue must be avoided.

Product Info
>Kisling AG Kisling AG
Bonding Technology

Features

Size of application area
mm²/³range
cm²/³ range
Thermoplastics
PA
PA (PA 6)
PA (PA 6.6)
PA (PA 12)
PBT
PC
PES
PET
PEEK
PMMA
PPS
PUR (lower degree of cross-linking)
PVC (harder perfomance)
PVC (softer perfomance)
Thermoplastics (low surface energy)
PE-HD (High Density)
PE-LD (Low Density)
PP
POM
Thermoplastics (Styrenes)
ABS
ASA
EPS
PPE
PS
SAN
SB
XPS (rigid foam)
Thermosetting Plastics
EP
MF
PF
PUR (higher degree of cross-linking)
UP
Thermosets (Composites)
CRP
BMC
FR4
GRP
SMC
Elastomers
CR
EPM/EPDM
NBR
NR
SBR
Metals - anti corrosive surfaces (passive)
aluminium
plumb
chromium
gold
nickel
magnets
platinum
silver
silicium
steel - chromated
steel - stainless
steel - galvanised
titanium
zinc (also galvanized materials)
tin
Glass & Ceramic Materials
glass
ceramics
ceramic (techno-)
Wood & Timber
veneer
cork
MDF - medium density fiberboard
Paper & Cardboard
alu-coated materials
foils
FR2 - synthetic resin bonded paper
Fabrics & Leather
leather
Anchoring & Fixing
screw thread - through hole
screw thread - pocket hole bore
chemical screw retention
1-part systems
cyanacrylate
Sector classification
manufacuting industry
Temperature resistance <0°C (approx.)
from -30°C
Temperature resistance >0°C (approx.)
to +100°C
Colour of adhesive film
crystal clear
colourless
Curing mechanisms
moisture curing
Pot life @ +20/23°C - Minimum / seconds
31-59 sec
(Mixed) viscosity
low viscosity
Application Types
dot application
Liquid Adhesives
1-part systems

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable adhesives that may be available. SUBSTRATEC gives no guarantee that the adhesive suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant adhesive manufacturer or supplier. See for further information Terms of Use.