MD 2K MS Polymer

Bonding Technology

MD MS 2K Polymer is a high-quality MS Polymer-based adhesive. Resistant to UV, weather, water, damp and chlorine.

MD MS 2K Polymer adheres extremely well to many surfaces in most cases without primer. Complete hardening, grey after one hour, black after four hours – conventional MS Polymer (3 mm) in 24 hours. Curing time handling after 15 minutes.

  • Rapid hardening due to 2K system
  • Hardening without humidity even with large surfaces
  • Isocyanate and silicone-free
  • Can be painted over or coated, applicable wet-on-wet
  • Permanently elastic
  • available in grey and black
Product Info
Marston-Domsel GmbH
Bonding Technology

Marston-Domsel manufactures and markets a large number of technically highly developed sealants, anaerobic liquid plastics and adhesives as well as other auxiliary materials worldwide for trade and industry.


Size of adhesive area
cm²-/cm³ range
m²-/m³ range
2-part systems
2-part STP - silane modified polymers
Sector classification
manufacuting industry
construction & craft
Temperature resistance <0°C (approx.)
from -40°C
Temperature resistance >0°C (approx.)
to +80°C
Sh-A 21 to 40
Deformation capability
> 300%
Gap filling properties
≤ 10mm
Colour of adhesive film
colour spectrum bright
Pot life @ +20/23°C - Minimum / minutes
6-15 min
Packaging unit
cartridge (1- or 2-part)
Liquid Adhesives
2-part systems

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable adhesives that may be available. SUBSTRATEC gives no guarantee that the adhesive suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant adhesive manufacturer or supplier. See for further information Terms of Use.