MD GLUE 111.495

Bonding Technology

For high-strength bonding of metals and plastic combinations. Universally applicable.

  • Base: Ethyl Cyanacrylate
  • Viscosity: 20°C mPa.s 35 - 70
  • Gap filling: 0,07 mm
  • Curing time handling: 5-15 sec.
  • Temperature resistance: -50°C to +80°C
  • NSF Listed P1 (reg. no. 142940)
Product Info
>Marston-Domsel GmbH Marston-Domsel GmbH
Bonding Technology

Features

Size of application area
mm²/³range
cm²/³ range
Elastomers
EPM/EPDM
Glass & Ceramic Materials
glass
Fabrics & Leather
leather
1-part systems
cyanacrylate
Sector classification
manufacuting industry
Temperature resistance <0°C (approx.)
from -50°C
Temperature resistance >0°C (approx.)
to +80°C
Gap filling properties
≤ 0,2mm
Colour of adhesive film
crystal clear
Curing mechanisms
moisture curing
Pot life @ +20/23°C - Minimum / seconds
1-5 sec
(Mixed) viscosity
low viscosity
Packaging unit
small packaging unit (can, tube, etc.)
hobbock/ drum
customized packaging
Liquid Adhesives
1-part systems

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable adhesives that may be available. SUBSTRATEC gives no guarantee that the adhesive suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant adhesive manufacturer or supplier. See for further information Terms of Use.