MD GLUE 150.424

Bonding Technology

For universal application with a wide variety of materials.

  • Base: Ethyl Cyanacrylate
  • Viscosity: 20°C mPa.s 50 -100
  • Gap filling: 0,10 mm
  • Curing time handling: 8-20 sec.
  • Temperature resistance: 0°C to +80°C
  • NSF Listed P1 (Reg. No. 150265)
Product Info
Marston-Domsel GmbH
Bonding Technology

Marston-Domsel manufactures and markets a large number of technically highly developed sealants, anaerobic liquid plastics and adhesives as well as other auxiliary materials worldwide for trade and industry.

Features

Size of adhesive area
mm²-/mm³range
cm²-/cm³ range
1-part systems
1-part cyanacrylate
Product Labelling
solvent-free
Temperature resistance <0°C (approx.)
from -60°C
Temperature resistance >0°C (approx.)
to +80°C
Gap filling properties
≤ 0,2mm
Thermal conductivity
heat-conductive
Colour of adhesive film
crystal clear
Curing mechanisms
moisture curing
Pot life @ +20/23°C - Minimum / seconds
6-10 sec
11-30 sec
31-59 sec
Pot life @ +20/23°C - Minimum / minutes
1-5 min
(Mixed) viscosity
low viscosity
Packaging unit
small packaging unit (can, tube, etc.)
hobbock/ drum
customized packaging
Sector classification
manufacuting industry
construction & craft
Degree of automation
manuel application
semi automatic (hand-operated)
fully automated
Application Types
dot application
line, bead application
surface coating
casting, sealing
Liquid Adhesives
1-part systems
High Performance Plastics
PPS
PSU
PES
Thermoplastics
PA
PA (PA 6)
PA (PA 6.6)
PA (PA 12)
PBT
PUR (lower degree of cross-linking)
PVC (harder perfomance)
PVC (softer perfomance)
Thermoplastics (low surface energy)
POM
Thermoplastics (Styrenes)
ABS
ASA
EPS
SAN
SB
XPS (rigid foam)
Thermosetting Plastics
EP
HPL
MF
PF
PUR (higher degree of cross-linking)
UP
Thermosets (Composites)
CRP
BMC
FR4
GRP
SMC
Elastomers
CR
EPM/EPDM
NBR
NR
SBR
Metals - susceptible to corrosion (active)
bronze
cast iron
copper
magnesium
brass
steel (blasted SA 2,5)
Metals - anti corrosive surfaces (passive)
aluminium
chromium
gold
nickel
plumb
platinum
silver
silicium
steel - chromated
steel - stainless
steel - galvanised
titanium
zinc (also galvanized materials)
tin
Glass & Ceramic Materials
emaille
glass
ceramics
mosaic & tiles
porcelain
Mineral (Construction) Materials
insulating materials
gypsum & plasterboard
concrete & cement
artificial stones
natrual stones
Wood & Timber
veneer
HPL laminate
cork
solid timber - primed, painted, coated
solid timber - untreated
MDF - medium density fiberboard
multiplex board
parquet
Paper & Cardboard
dispersion-coated cardboards
foils
FR2 - synthetic resin bonded paper
coated cardboards
grey board
paper
corrugated cardboard
Fabrics & Leather
felt
jute
leather
fleece
Anchoring & Fixing
screw thread - through hole
screw thread - pocket hole bore
chemical screw retention

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable system that may be available. SUBSTRATEC gives no guarantee that the system suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant manufacturer or supplier. See for further information Terms of Use.