MD MS Polymer

Bonding Technology

Elastic adhesive, high strength, adhesive and sealing applications for interior and exterior, in construction and industry.

  • Isocyanate and silicone-free
  • Can be painted over or coated, applicable wet-on-wet
  • Resistant to UV radiation, weather, salt water and chlorine
  • Rapid hardening
  • Available in white, black, grey and clear
  • Resists some solvents
  • Polymerize even in thicker layers
  • Low shrinkage
  • ISEGA certificate of conformity 42277 U 16
Product Info
>Marston-Domsel GmbH Marston-Domsel GmbH
Bonding Technology

Features

Thermoplastics
PC
PVC (harder perfomance)
Metals - susceptible to corrosion (active)
copper
steel (blasted SA 2,5)
Metals - anti corrosive surfaces (passive)
aluminium
plumb
zinc (also galvanized materials)
Glass & Ceramic Materials
emaille
glass
ceramics
Construction Materials & Substrates
gypsum & plasterboard
infrastructure - concrete & rock
natrual stones
Wood & Timber
HPL laminate
solid timber - untreated
1-part systems
STP - silane modified polymers
Solvents
solvent-free
Sector classification
manufacuting industry
construction & craft
Temperature resistance <0°C (approx.)
from -40°C
Temperature resistance >0°C (approx.)
to +100°C
chemical substances (non-binding information)
salt water
Shore-A
Sh-A 41 to 60
Deformation capability
≤ 300%
Colour of adhesive film
colour-stable
crystal clear
colour spectrum bright
colour spectrum dark
white
black
Curing mechanisms
moisture curing
Pot life @ +20/23°C - Minimum / minutes
1-5 min
(Mixed) viscosity
pasty
Liquid Adhesives
1-part systems

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable adhesives that may be available. SUBSTRATEC gives no guarantee that the adhesive suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant adhesive manufacturer or supplier. See for further information Terms of Use.