Merbenit SK212

Bonding Technology

Merbenit SK212 is an elastic adhesive with high initial tack and strength. Thanks SMP base especially suitable for bondings where short handling strength is required; for example for bonding windscreens on vehicles. Merbenit SK212 is certified after the branch standards NCAP and FMVSS212.

Product advantages

  • Very high initial adhesion
  • Free of solvents, isocyanates and silicones
  • Adjustable
  • Fast complete curing
  • Permanently elastic from - 40°C to + 90°C
  • Very high mechanical strength
  • Very good sealing properties
  • Very wide adhesion range
  • Odourless
  • Compatible with paints
  • Chemical neutral polymerisation
  • Shortly resistant up to +200°C for powder and thermal coating
  • Non-corrosive on surfaces
  • Impact and vibration resistant (shock absorbing)
  • Resists thermal expansion and material tension
Product Info
>merz+benteli AG merz+benteli AG
Bonding Technology

Features

Size of application area
cm²/³ range
m²/³ range
Thermoplastics
PA
PA (PA 6)
PA (PA 6.6)
PA (PA 12)
PC
PET
PMMA
PUR (lower degree of cross-linking)
PVC (harder perfomance)
PVC (softer perfomance)
Thermoplastics (Styrenes)
ABS
ASA
EPS
PPE
SAN
SB
XPS (rigid foam)
Thermosetting Plastics
EP
HPL
MF
PF
PUR (higher degree of cross-linking)
UP
Thermosets (Composites)
BMC
FR4
GRP
SMC
Elastomers
CR
EPM/EPDM
NBR
NR
SBR
Metals - susceptible to corrosion (active)
cast iron
copper
magnesium
brass
steel (blasted SA 2,5)
Metals - anti corrosive surfaces (passive)
aluminium
plumb
chromium
nickel
magnets
steel - chromated
steel - stainless
steel - galvanised
zinc (also galvanized materials)
tin
Glass & Ceramic Materials
emaille
glass
ceramics
ceramic (techno-)
mosaic & tiles
porcelain
Construction Materials & Substrates
insulating materials
engineered stone
gypsum & plasterboard
infrastructure - concrete & rock
artificial stones
natrual stones
final floor layer - tile
final floor layer - laminate/lino/pvc
subfloor - concrete/screed/cement
walls & ceilings
Wood & Timber
veneer
HPL laminate
CPL laminate
cork
solid timber - primed, painted, coated
solid timber - untreated
MDF - medium density fiberboard
multiplex board
OSB - oriented strand board
1-part systems
STP - silane modified polymers
Solvents
solvent-free
Sector classification
manufacuting industry
Temperature resistance <0°C (approx.)
from -40°C
Temperature resistance >0°C (approx.)
to +80°C
Shore-A
Sh-A 41 to 60
Deformation capability
≤ 300%
Colour of adhesive film
colour spectrum dark
black
vehicle exteriors
windscreen bondings
Curing mechanisms
moisture curing
Pot life @ +20/23°C - Minimum / minutes
6-15 min
(Mixed) viscosity
solid
Packaging unit
cartridge (1- or 2-part)
sackware
Liquid Adhesives
1-part systems

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable adhesives that may be available. SUBSTRATEC gives no guarantee that the adhesive suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant adhesive manufacturer or supplier. See for further information Terms of Use.