Polytec EP 630 - Unfilled Epoxy Adhesive

Bonding Technology

Polytec EP 630 is a 100% solid, two-component, low viscosity, high temperature adhesive underfill and encapsulation. It provides excellent high temperature, chemical, electrical and moisture resistance.

Polytec EP 630 was designed for semiconductor, medical, hybrid, piezo, fiberoptics, HV and UHV applications. It has an excellent adhesion to silicon, glass, metal, ceramic, ferrite and most plastics and can be used as low viscosity adhesive, epoxy impregnation, underfill and encapsulation.

More over the Polytec EP 630 complies to USP Class VI Biocompatibility Standards. The material can be applied via dispensing, jet-dispensing and manual application.

Product Info
Polytec PT GmbH
Bonding Technology

The POLYTEC PT GmbH develops, manufactures and sells special adhesives for applications in the electronics, electrical engineering, medical technology and optics.

Features

Size of adhesive area
µm²-/µm³ range
mm²-/mm³range
cm²-/cm³ range
2-part systems
2-part epoxy resins
biocompatibility
USP class VI/ISO 10993
Temperature resistance <0°C (approx.)
from -55°C
Temperature resistance >0°C (approx.)
to +220°C
Shore-D
Sh-D 81 to 100
Deformation capability
≤ 10%
Colour of adhesive film
colour spectrum bright
Curing mechanisms
warm-/hot curing
Pot life @ +20/23°C - Minimum / hours
> 12 h
(Mixed) viscosity
medium viscosity
Packaging unit
small packaging unit (can, tube, etc.)
customized packaging
Mobility - Land Transportation / filter and fluid technology & hvac
thread sealings
Microtechnology / chipbonden
underfiller
Microtechnology / encapsulation
dam & fill
coatings
pottings
White Goods & Consumer Electronics / smart cards
RFID (radio frequency identification)
Medical & Biotechnology / medical equipment & accessories
several bondings - medical equipments
Medical & Biotechnology / medical applications
several bondings - medical applications
Sector classification
manufacuting industry
Application Types
dot application
line, bead application
Liquid Adhesives
2-part systems
High Performance Plastics
PSU
PES
Thermoplastics
PA
PBT
PET
Thermoplastics (low surface energy)
POM
Thermoplastics (Styrenes)
ABS
PPE
PS
SB
Thermosetting Plastics
EP
Thermosets (Composites)
CRP
FR4
GRP
Metals - susceptible to corrosion (active)
cast iron
copper
brass
steel (blasted SA 2,5)
Metals - anti corrosive surfaces (passive)
aluminium
gold
silicium
steel - chromated
steel - stainless
steel - galvanised
tin
Glass & Ceramic Materials
glass
ceramics

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable system that may be available. SUBSTRATEC gives no guarantee that the system suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant manufacturer or supplier. See for further information Terms of Use.