Polytec EP 660 - Unfilled Epoxy Adhesive

Bonding Technology

Polytec EP 660 is a 100% solid, two-component, low viscosity, high temperature and high Tg epoxy, impregnation and coating material.

Polytec EP 660 has an excellent chemical and moisture resistance and can withstand operating temperatures up to 300°C.

It is recommended as sealant and impregnation for all soaking surfaces like ceramics, woods, plastics, High-Temp fabric and powders as well as fiber bundles. A typical application is the impregnation and sealing of the magnesium oxide filler in tubular heaters/ heating elements.

The material can be applied via dispensing, jet-dispensing and manual application.

Product Info
Polytec PT GmbH
Bonding Technology

The POLYTEC PT GmbH develops, manufactures and sells special adhesives for applications in the electronics, electrical engineering, medical technology and optics.

Features

Size of adhesive area
mm²-/mm³range
cm²-/cm³ range
Thermoplastics
PA
PBT
PES
PET
PSU
Thermoplastics (low surface energy)
POM
Thermoplastics (Styrenes)
ABS
PPE
PS
SB
Thermosetting Plastics
EP
Thermosets (Composites)
CRP
GRP
Metals - susceptible to corrosion (active)
copper
Metals - anti corrosive surfaces (passive)
steel - chromated
steel - stainless
steel - galvanised
2-part systems
epoxy resins
Solvents
solvent-free
Sector classification
manufacuting industry
Temperature resistance <0°C (approx.)
from -55°C
Temperature resistance >0°C (approx.)
to +250°C
Shore-D
Sh-D 81 to 100
Deformation capability
≤ 10%
Electrical conductivity
electrically insulating
Colour of adhesive film
colour spectrum bright
yellow
Construction Components & Elements
heating, ventilation & air conditioning technology
Curing mechanisms
room temperature curing
Pot life @ +20/23°C - Minimum / minutes
31-59 min
(Mixed) viscosity
medium viscosity
Packaging unit
small packaging unit (can, tube, etc.)
customized packaging
Application Types
casting, sealing
Liquid Adhesives
2-part systems

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable adhesives that may be available. SUBSTRATEC gives no guarantee that the adhesive suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant adhesive manufacturer or supplier. See for further information Terms of Use.