RAKU® PUR 49-2050

Bonding Technology

RAKU® PUR 49-2050 is a solvent-free, moisture-curing, one-component PU adhesive for the production of composite elements. The adhesive cures after a medium open time (wet bonding time) under the influence of moisture and shows a broad adhesion spectrum. Initial strength is achieved after approx. 3 hours.

Product Info
RAMPF Polymer Solutions GmbH & Co. KG
Bonding Technology

RAMPF Polymer Solutions GmbH & Co. KG based in Grafenberg near Stuttgart is your global partner for innovative bonding, sealing and encapsulation solutions.

Features

Size of adhesive area
mm²-/mm³range
cm²-/cm³ range
m²-/m³ range
1-part systems
1-part polyurethane
Solvents
solvent-free
Colour of adhesive film
colour spectrum dark
Curing mechanisms
moisture curing
Pot life @ +20/23°C - Minimum / minutes
16-30 min
(Mixed) viscosity
high viscosity
Packaging unit
hobbock/ drum
Degree of automation
manuel application
semi automatic (hand-operated)
Application Types
dot application
line, bead application
surface coating
Liquid Adhesives
1-part systems
Thermoplastics
PA
PA (PA 6)
PA (PA 6.6)
PA (PA 12)
PMMA
PUR (lower degree of cross-linking)
PVC (harder perfomance)
Thermoplastics (Styrenes)
ABS
ASA
EPS
PS
SAN
SB
XPS (rigid foam)
Thermosetting Plastics
EP
HPL
PUR (higher degree of cross-linking)
UP
Thermosets (Composites)
CRP
BMC
FR4
GRP
SMC
Elastomers
NBR
SBR
Metals - susceptible to corrosion (active)
steel (blasted SA 2,5)
Metals - anti corrosive surfaces (passive)
zinc (also galvanized materials)
Construction Materials
insulating materials
gypsum & plasterboard
Wood & Timber
veneer
HPL laminate

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable adhesives that may be available. SUBSTRATEC gives no guarantee that the adhesive suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant adhesive manufacturer or supplier. See for further information Terms of Use.