RAKU® SIL 47-1401

Bonding Technology

RAKU® SIL 47-1401 is a pasty, room temperature curing, condensation curing two-component silicone elastomer with very fast reaction at room temperature and very good electrical insulation properties. It has excellent weathering and ozone resistance. UL 746-C-f2 and UL 94 HB.

Product Info

RAMPF Polymer Solutions GmbH & Co. KG

Bonding Technology

RAMPF Polymer Solutions GmbH & Co. KG based in Grafenberg near Stuttgart is your global partner for innovative bonding, sealing and encapsulation solutions.

Features

Size of adhesive area

mm²-/mm³range

cm²-/cm³ range

Thermoplastics

PA (PA 6)

PA (PA 6.6)

PA (PA 12)

PBT

Thermoplastics (low surface energy)

Thermoplastics (Styrenes)

ABS

ASA

Elastomers

Metals - anti corrosive surfaces (passive)

aluminium

steel - stainless

zinc (also galvanized materials)

Glass & Ceramic Materials

glass

Wood & Timber

HPL laminate

2-part systems

silicone (RTV-2)

UL Underwriters Laboratories

UL 94 HB

UL 746C

Sector classification

manufacuting industry

Temperature resistance <0°C (approx.)

from -50°C

Temperature resistance >0°C (approx.)

to +200°C

Shore-A

Sh-A 21 to 40

Deformation capability

≤ 300%

Electrical conductivity

electrically insulating

Colour of adhesive film

colour spectrum bright

Curing mechanisms

room temperature curing

Pot life @ +20/23°C - Minimum / minutes

6-15 min

(Mixed) viscosity

pasty

solid

Packaging unit

cartridge (1- or 2-part)

hobbock/ drum

Liquid Adhesives

2-part systems

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable adhesives that may be available. SUBSTRATEC gives no guarantee that the adhesive suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant adhesive manufacturer or supplier. See for further information Terms of Use.