SG230 HV

Bonding Technology

SCIGRIP® SG230 HV (High Viscosity) Methacrylate Adhesive, is a two-component, 10:1 mix ratio product for bonding composite and other plastic parts with little to no surface preparation.

The adhesive is designed to work with a selection of activators to provide a wide range of working times from 30 to 120 minutes. SG230 HV is mostly used in marine, transportation and construction applications. It is especially suited for bonding large structural parts requiring long working times and for filling deep irregular gaps up to 1.5 inches (39 mm). SG230 HV is available in 490 ml cartridges and 5 and 50 gallon (19 and 189 liters) in bulk containers for application with meter-mix dispense equipment. The combination of SG230 HV A with SG220 B activator is recommended only for use above 85°F (29°C) ambient temperature.

Product Info
SCIGRIP EUROPE Adhesives
Bonding Technology

Every day, the tough, reliable bond of SCIGRIP® structural adhesives is being used in thousands of structural applications all around the world.

Features

Size of adhesive area
m²-/m³ range
2-part systems
methylmethacrylate
Lloyd´s Register
Marine & Shipping
Sector classification
manufacuting industry
Deformation capability
≤ 150%
Gap filling properties
≤ 30mm
Curing mechanisms
room temperature curing
chemical curing
Pot life @ +20/23°C - Minimum / minutes
16-30 min
31-59 min
Pot life @ +20/23°C - Minimum / hours
1-2 h
Packaging unit
cartridge (1- or 2-part)
hobbock/ drum
Industrial Plants & Heavy Industry
several bondings - heavy industry
Liquid Adhesives
2-part systems
Thermoplastics
PC
PMMA
PVC (harder perfomance)
Thermoplastics (Styrenes)
ABS
ASA
Thermosetting Plastics
EP
UP
Thermosets (Composites)
CRP
FR4
GRP
Metals - susceptible to corrosion (active)
steel (blasted SA 2,5)
Metals - anti corrosive surfaces (passive)
aluminium
steel - stainless

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable adhesives that may be available. SUBSTRATEC gives no guarantee that the adhesive suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant adhesive manufacturer or supplier. See for further information Terms of Use.