SG300

Bonding Technology

SCIGRIP® SG300 Series Methacrylate Adhesives are two-component, 10:1 mix ratio products for bonding metals, composites and other plastic parts.

Most metals can be bonded without primer. These advanced products are designed to meet specific requirements of the transportation industry, including reduced read through on show surfaces. The combination of minimum surface preparation, primerless metal bonding and low read through makes the SG300 series products ideal for a variety of assembly operations. Packaging options include 490 ml cartridges and 5 and 50 gallon (19 and 189 liters) in bulk containers for application with meter-mix dispense equipment.

Product Info
SCIGRIP EUROPE Adhesives
Bonding Technology

Every day, the tough, reliable bond of SCIGRIP® structural adhesives is being used in thousands of structural applications all around the world.

Features

Size of adhesive area
cm²-/cm³ range
m²-/m³ range
2-part systems
methylmethacrylate
Lloyd´s Register
Marine & Shipping
Temperature resistance <0°C (approx.)
from -40°C
Temperature resistance >0°C (approx.)
to +80°C
Deformation capability
≤ 150%
Colour of adhesive film
colour spectrum bright
colour spectrum dark
white
black
Curing mechanisms
room temperature curing
Pot life @ +20/23°C - Minimum / minutes
6-15 min
16-30 min
31-59 min
Packaging unit
cartridge (1- or 2-part)
hobbock/ drum
Sector classification
manufacuting industry
Liquid Adhesives
2-part systems
Thermoplastics
PC
PMMA
PVC (harder perfomance)
Thermoplastics (Styrenes)
ABS
ASA
Thermosetting Plastics
EP
UP
Thermosets (Composites)
CRP
FR4
GRP
Metals - susceptible to corrosion (active)
steel (blasted SA 2,5)
Metals - anti corrosive surfaces (passive)
aluminium
steel - stainless
steel - galvanised
zinc (also galvanized materials)

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable system that may be available. SUBSTRATEC gives no guarantee that the system suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant manufacturer or supplier. See for further information Terms of Use.