tesa® 64905

Bonding Technology

tesa® 64905 is a double-sided adhesive tape consisting of a conformable black PE foam backing and a LSE adhesive. With a thickness of 0.5 mm, it is suitable for mounting of small parts, like emblem.

The LSE adhesive features a high initial adhesion to LSE clear coats and LSE plastics like PP and PP/EPDM, and MSE plastics like ABS and PC without using primer. It reaches ultimate peel adhesion level right after application. Additionally, it even provides near to ultimate performance at an application temperature as low as 5°C. The impressive cold shock performance results from the damping properties of the PE foam backing even at temperatures below -40°C. Due to its high conformability, the tape ensures a good wet out and secure bonding also on uneven surfaces and compensates for design tolerances. The PE foam backing also provides non-sticky edges resulting in excellent converting properties, e.g. for die cutting. Additionally, the tape combines high cohesive strength with a comparatively low density contributing positively to a low weight design.

Main features:

  • High initial adhesion to LSE and MSE surfaces without primer
  • Near to ultimate peel adhesion level right after application
  • Good performance at an application temperature as low as 5°C
  • Conformable foam backing to compensate design tolerances or uneven surfaces
  • Reliable performance at higher temperatures
  • Excellent converting properties LSE: low surface energy MSE: medium surface energy

Main Application

tesa® 64905 is suitable for mounting a wide range of small exterior and interior trims and parts.

Example applications are:

  • Small decorative exterior and interior trims
  • Emblems
  • Lettering like single letters for classification of car models or engine data
Product Info
tesa SE
Bonding Technology

With our reliable solutions and excellent service, we support industry partners in optimizing their processes and improving their products.

Features

Size of adhesive area
mm²-/mm³range
cm²-/cm³ range
Adhesive Tapes
double sided
liner
PE paper
carrier
polyethylene foam
total thickness
≤ 0,5 mm
Sector classification
manufacuting industry
Deformation capability
≤ 300%
Colour of adhesive film
colour spectrum dark
black
Degree of automation
manuel application
Application Types
adhesive tape application
Adhesive Tapes
double sided
High Performance Plastics
PTFE (Teflon®)
PPS
PSU
PEEK
PES
Thermoplastics
PA
PA (PA 6)
PA (PA 6.6)
PA (PA 12)
PBT
PC
PET
PMMA
PUR (lower degree of cross-linking)
PVC (harder perfomance)
PVC (softer perfomance)
Thermoplastics (low surface energy)
PE-HD (High Density)
PE-LD (Low Density)
PP
POM
Thermoplastics (Styrenes)
ABS
ASA
EPS
PPE
PS
SAN
SB
XPS (rigid foam)
Thermosetting Plastics
EP
HPL
MF
PF
PUR (higher degree of cross-linking)
UP
Thermosets (Composites)
CRP
BMC
FR4
GRP
SMC
Elastomers
CR
EPM/EPDM
NBR
neoprene
NR
SBR
SI
Metals - susceptible to corrosion (active)
bronze
cast iron
copper
magnesium
brass
steel (blasted SA 2,5)
Metals - anti corrosive surfaces (passive)
aluminium
plumb
chromium
gold
nickel
magnets
platinum
silver
silicium
steel - chromated
steel - stainless
steel - galvanised
titanium
zinc (also galvanized materials)
tin
Glass & Ceramic Materials
emaille
glass
ceramics
ceramic (techno-)
mosaic & tiles
porcelain
Construction Materials
engineered stone
gypsum & plasterboard
artificial stones
natrual stones
final floor layer - tile
final floor layer - laminate/lino/pvc
final floor layer - parquet
walls & ceilings
Wood & Timber
veneer
HPL laminate
CPL laminate
cork
solid timber - primed, painted, coated
solid timber - untreated
MDF - medium density fiberboard
multiplex board
OSB - oriented strand board
parquet
chipboard
Paper & Cardboard
alu-coated materials
foils
FR2 - synthetic resin bonded paper
coated cardboards
grey board
OPP-laminate
paper
PE-coated boards
UV-coated boards
corrugated cardboard
Fabrics & Leather
felt
jute
leather
fleece

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable adhesives that may be available. SUBSTRATEC gives no guarantee that the adhesive suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant adhesive manufacturer or supplier. See for further information Terms of Use.

Information Desk