Easy-Mix HT 250 Epoxy Adhesive

Bonding Technology

high thermal conductivity | good temperature resistance | long pot life

WEICON Easy-Mix HT 250 is a 2-component adhesive based on epoxy resin and maintains its technical properties even at high temperatures up to +250 °C.

The two-component epoxy resin adheres particularly well to metals. The excellent suitability of WEICON HT 250 particularly for specific applications is demonstrated especially by its good thermal conductivity as well as by its high temperature resistance. These features enable the bonding of building components, which can be powder-coated after complete curing.

WEICON HT 250 shows good resistance to the impact of different substances, especially warm and cold water, engine oil and glycol.

Product Info
WEICON GmbH & Co. KG
Bonding Technology

WEICON products are available worldwide. We run nine international branches and are represented by over 1,200 distribution partners in more than 120 countries.

Features

Size of adhesive area
mm²-/mm³range
cm²-/cm³ range
2-part systems
2-part epoxy resins
UL Underwriters Laboratories
UL 94 HB
Temperature resistance <0°C (approx.)
from -50°C
Temperature resistance >0°C (approx.)
to +250°C
Shore-D
Sh-D 81 to 100
Deformation capability
≤ 10%
Gap filling properties
≤ 5mm
Colour of adhesive film
colour spectrum dark
Curing mechanisms
room temperature curing
Pot life @ +20/23°C - Minimum / hours
3-4 h
(Mixed) viscosity
high viscosity
Packaging unit
cartridge (1- or 2-part)
Sector classification
manufacuting industry
Degree of automation
manuel application
Application Types
dot application
line, bead application
Liquid Adhesives
2-part systems
Thermoplastics
PET
Thermosetting Plastics
EP
Thermosets (Composites)
CRP
FR4
GRP
Metals - susceptible to corrosion (active)
bronze
copper
brass
steel (blasted SA 2,5)
Metals - anti corrosive surfaces (passive)
aluminium
steel - stainless
Mineral (Construction) Materials
joints & crack repair
gypsum & plasterboard
Wood & Timber
veneer
solid timber - untreated
MDF - medium density fiberboard
multiplex board
OSB - oriented strand board
chipboard
Anchoring & Fixing
chemical anchoring systems

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable system that may be available. SUBSTRATEC gives no guarantee that the system suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant manufacturer or supplier. See for further information Terms of Use.