Easy-Mix PE-PP 50 Structural Acrylic Adhesive

Bonding Technology

transparent | for low surface energy plastics | for small bonding gaps

WEICON Easy-Mix PE-PP 50 is a 2-component construction adhesive based on methyl acrylate. Due to its transparent curing, it is particularly suitable for visually appealing, high-strength adhesive bonding of low surface energy plastics, such as PE, PP and TPE. Thanks to its special formula, the adhesive is suitable for zero-gap bonds and for connecting surfaces with extremely small bonding gaps of less than 0.2 mm.

Product Info
WEICON GmbH & Co. KG
Bonding Technology

WEICON products are available worldwide. We run nine international branches and are represented by over 1,200 distribution partners in more than 120 countries.

Features

Size of adhesive area
mm²-/mm³range
cm²-/cm³ range
2-part systems
methylmethacrylate
Sector classification
manufacuting industry
Temperature resistance <0°C (approx.)
from -50°C
Temperature resistance >0°C (approx.)
to +80°C
Deformation capability
≤ 10%
Gap filling properties
≤ 0,1mm
Colour of adhesive film
crystal clear
translucent
colourless
Curing mechanisms
room temperature curing
Pot life @ +20/23°C - Minimum / minutes
6-15 min
(Mixed) viscosity
pasty
Packaging unit
small packaging unit (can, tube, etc.)
Degree of automation
manuel application
Application Types
dot application
line, bead application
surface coating
Liquid Adhesives
2-part systems
Thermoplastics
PA (PA 6.6)
PC
PMMA
PVC (harder perfomance)
Thermoplastics (low surface energy)
PE-HD (High Density)
PE-LD (Low Density)
PP
POM
Thermoplastics (Styrenes)
ABS
Thermosets (Composites)
CRP
GRP
Elastomers
CR
EPM/EPDM
NBR
NR
SBR
SI
Metals - anti corrosive surfaces (passive)
aluminium
steel - stainless

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable adhesives that may be available. SUBSTRATEC gives no guarantee that the adhesive suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant adhesive manufacturer or supplier. See for further information Terms of Use.