COSMO CA-500.110

Bonding Technology

Only a few drops of this super-fast instant glue suffice for most applications in order to achieve powerful assemblies. The practical PE-bottles make possible a dot-like accurate application of the adhesive onto the parts to be bonded.

Thanks to its wide adhesive spectrum, COSMO CA-500.110 is suitable for a lot of different materials for many application fields in trade and industry and is mainly qualified for the bonding of diverse rubber- and PVC-surfaces (is excellent e.g. in the window manufacturing for the bonding of APTK / EPDM-seals and profile joints).

  • particularly short setting times
  • very high bonding strength
  • hard glued joint
  • the substrates are good wetted
  • quick initial adhesion to continue assembly work
  • different viscosities and setting times possible
  • good outdoor weather resistance
  • high cold- and heat resistance
  • very good stability against UV
  • bonding of APTK / EPDM-elastomers
  • suitable to bond a lot of plastic materials, metals and wood, as well as other porous surfaces
  • solvent-free
Product Info

Features

Size of application area
mm²/³range
Thermoplastics
PA
PA (PA 6)
PA (PA 6.6)
PA (PA 12)
PC
PES
PET
PMMA
PUR (lower degree of cross-linking)
PVC (harder perfomance)
PVC (softer perfomance)
Thermoplastics (Styrenes)
ABS
ASA
PS
SAN
SB
Thermosetting Plastics
EP
HPL
MF
PF
PUR (higher degree of cross-linking)
UP
Thermosets (Composites)
CRP
BMC
FR4
GRP
Elastomers
CR
EPM/EPDM
NBR
NR
SBR
Metals - susceptible to corrosion (active)
bronze
cast iron
copper
magnesium
brass
steel (blasted SA 2,5)
Metals - anti corrosive surfaces (passive)
aluminium
zinc (also galvanized materials)
tin
Glass & Ceramic Materials
emaille
glass
ceramics
mosaic & tiles
porcelain
Construction Materials & Substrates
gypsum & plasterboard
infrastructure - concrete & rock
artificial stones
natrual stones
final floor layer - tile
final floor layer - laminate/lino/pvc
final floor layer - parquet
subfloor - concrete/screed/cement
Wood & Timber
veneer
HPL laminate
CPL laminate
cork
solid timber - primed, painted, coated
solid timber - untreated
MDF - medium density fiberboard
multiplex board
OSB - oriented strand board
parquet
Paper & Cardboard
dispersion-coated cardboards
FR2 - synthetic resin bonded paper
coated cardboards
grey board
paper
corrugated cardboard
Fabrics & Leather
felt
jute
leather
fleece
1-part systems
cyanacrylate
Solvents
solvent-free
Package labelling
hazardous labels
Sector classification
manufacuting industry
construction & craft
Temperature resistance <0°C (approx.)
from -40°C
Temperature resistance >0°C (approx.)
to +80°C
Deformation capability
≤ 10%
windows & doors (wood)
EPDM-profiles
White Goods & Consumer Electronics
microelectronics / optics / sensor systems
windows & doors
epdm-profiles
Curing mechanisms
moisture curing
Pot life @ +20/23°C - Minimum / seconds
1-5 sec
6-10 sec
(Mixed) viscosity
low viscosity
Packaging unit
small packaging unit (can, tube, etc.)
Liquid Adhesives
1-part systems

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable adhesives that may be available. SUBSTRATEC gives no guarantee that the adhesive suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant adhesive manufacturer or supplier. See for further information Terms of Use.