Cyclospotter

Measurement, Testing, QA

In-process control with Cyclospotter.

Optical inline inspection of adhesive seams and sealant beads.

With in-process or in-line adhesive bead control, a sensor unit is mounted directly on the application tool. A robot guides the application tool with sensor over the respective workpiece or vice versa (workpiece along the glue nozzle). In both cases, the adhesive bead is inspected directly during adhesive application.

  • No additional cycle time required
  • No additional inspection station necessary
  • High inspection speed
  • Only one sensor unit

The compact Cyclospotter camera head combines 3 CCD sensors in one housing, for a 360° view of the adhesive bead.

Cyclospotter

The compact camera head with 3 CCD sensors and RGB LED technology was specially developed for the inspection of sealants and adhesive beams directly during the application process. Due to the simultaneous image acquisition of three images each from different perspectives, the bead is always visible in the image of one sensor. No reorientation of the work piece or the camera is required when changing direction during the application.

  • 54 RGB LEDs with free colour adjustment for perfect contrast
  • Power supply 24VDC for RGB-LEDs
  • Rapid inline check
  • Compact design
  • 3CCD image sensor
  • Gigabit Ethernet with industrial M12 connector
  • Application speed up to 500 mm/s
  • Working distance 125 mm
  • Nozzle diameter up to 38 mm
  • M12 trigger connector 24VDC directly from dispenser or robot
Find out more
VisionTools Bildanalyse Systeme GmbH
Measurement, Testing, QA

VisionTools Bildanalyse Systeme GmbH offers a wide range of products for the optical inspection of adhesive and sealing beads in automated application processes.

Contact Form

Features

Adhesive and sealant systems
Adhesive
Sealant
Dispensing and application systems
Measurement and testing
Size of application surface
cm²-/cm³ range - workpieces
m² range - components
Areas up to 10m²
Application Types
line, bead application
Measurement technology
non-destructive
Test technologies
In-Process
optical inspection
Application, processing and systems
Measuring and Testing
Measurement/ Testing/ QA

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable system that may be available. SUBSTRATEC gives no guarantee that the system suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant manufacturer or supplier. See for further information Terms of Use.

Information Desk