VS gear flow meter

Measurement & Testing

Our VS gear flow meters offer unbeatable performance, linearity and resolution for most accurate measurement of clear, viscous liquids according to the gearwheel principle.

A gearwheel pair adapted with precision into the housing forms the measuring unit. The rotation of the measuring unit is recorded contact-free by a signal pick-up system and converted into digital pulses.

The VS can be used to measure all pumping liquids which have a certain lubrication capacity, e.g. petrol, (low flammable) mineral oils, paints, greases, resins, and much more.

The flow meters are available in grey cast iron and stainless-steel.

Product Info
VSE Volumentechnik GmbH
Measurement & Testing

VSE Volumentechnik GmbH, located in Neuenrade (NRW), stands for high precision flow measurement technology. The company develops and produces flow meters for virtually all pumpable media and the corresponding evaluation electronics.

Features

Which system solution are you searching for?
Processing Technologies
Size of application area
mm²-/mm³range
cm²-/cm³ range
Liquid Material Systems
1-part systems
2-part systems
Temperature resistance <0°C (approx.)
from -40°C
Temperature resistance >0°C (approx.)
to +200°C
Degree of automation
fully automated
stationary
Application Types
dot application
line, bead application
Application Systems
dispensing - with contact
dispensing - conctactless
(Mixed) viscosity
low viscosity
medium viscosity
high viscosity
pasty
Curing mechanisms
room temperature curing
warm-/hot curing
Flowrate
≤ 10l/min (approx values)
≤ 5ml/min (approx values)
≤ 10ml/min (approx values)
≤ 100ml/min (approx values)
≤ 500ml/min (approx values)
≤ 1l/min (approx values)
≤ 100l/min (approx values)
> 100l/min (approx values)
measurement and testing technology
sensors

Contact Form

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable system that may be available. SUBSTRATEC gives no guarantee that the system suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant manufacturer or supplier. See for further information Terms of Use.

Information Desk