Bylamet EL-35

Adhesive Bonding Technology

Bylamet EL-35 shows better properties of impact resistance, peeling resistance, water resistance and heat resistance than regular Bylamet types. Bylamet EL-35 bonds a variety of metals as well as other materials cyanoacrylates can bond.

Find out more
BYLA GmbH
Adhesive Bonding Technology

Byla - Your competent partner for adhesives and specialty chemicals.

Contact Form

Features

Adhesive and sealant systems
Adhesive
Components
1-part systems
1-part systems
1-part cyanacrylate
High Performance Plastics
PPS
PSU
PEEK
PES
Thermoplastics
ABS
ASA
EPS
PA
PA (PA 6)
PA (PA 6.6)
PA (PA 12)
PBT
PC
PET
PMMA
PPE
PUR (lower degree of cross-linking)
PVC (harder perfomance)
PVC (softer perfomance)
SAN
SB
XPS (rigid foam)
Elastomers
CR
EPM/EPDM
NBR
neoprene
SBR
Thermosetting Plastics
EP
HPL
MF
PF
PUR (higher degree of cross-linking)
UP
Composites
CRP
BMC
FR4
GRP
SMC
Metals
aluminium
plumb
bronze
chromium
gold
cast iron
copper
magnesium
magnets
brass
nickel
platinum
silver
silicium
steel - blasted SA 2,5
steel - chromated
steel - stainless
steel - galvanised
titanium
zinc (also galvanized materials)
tin
Glass & Ceramic Materials
glass
porcelain
Wood & Timber
solid timber - primed, painted, coated
Size of application area
mm²-/mm³range - precision parts
cm²-/cm³ range - component
Curing mechanisms
room temperature curing
Pot life @ +20/23°C - Minimum / seconds
6-10 sec
11-30 sec
31-59 sec
(Mixed) viscosity
low viscosity
temperature resistance >0°C (approx.)
to +80°C
colour and colour fastness
transparent
Shore-A
Sh-A 81 to 100
Anchoring & Fixing
screw thread - through hole
screw thread - pocket hole bore
chemical screw retention

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable system that may be available. SUBSTRATEC gives no guarantee that the system suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant manufacturer or supplier. See for further information Terms of Use.