MD MK 3000

Adhesive Bonding Technology

Mounting adhesive with immediate initial adhesion. MD MK 3000 is the new generation of mounting adhesives and has a very strong initial bonding.

Bonding of heavy parts in vertical positions and ceiling mounting is possible. Unlike with conventional adhesives it is also possible to bond heavy items such as stones, wood, tiles and metals to walls and ceilings with MD MK 3000 without sagging and sliding off.

  • Immediate initial bonding
  • Odorless
  • Resistant to weather, UV radiation, water, chlorine etc.
  • Isocyanate and silicone-free
  • Can be painted over or coated
  • Permanently elastic and universally applicable
Find out more
Marston-Domsel GmbH
Adhesive Bonding Technology

Marston-Domsel manufactures and markets a large number of technically highly developed sealants, anaerobic liquid plastics and adhesives as well as other auxiliary materials worldwide for trade and industry.

Contact Form

Features

Sector expertise
Manufacuting industry
Construction & craft
Components
1-part systems
1-part systems
1-part STP - silane modified polymers
High Performance Plastics
PPS
PSU
PES
Thermoplastics
ABS
ASA
EPS
PA
PA (PA 6)
PA (PA 6.6)
PA (PA 12)
PBT
PC
PMMA
POM
PPE
PS
PUR (lower degree of cross-linking)
PVC (harder perfomance)
PVC (softer perfomance)
SAN
SB
XPS (rigid foam)
Elastomers
CR
EPM/EPDM
NBR
NR
SBR
SI
Thermosetting Plastics
EP
HPL
MF
PF
PUR (higher degree of cross-linking)
UP
Composites
CRP
BMC
FR4
GRP
SMC
Metals
aluminium
plumb
bronze
chromium
gold
cast iron
copper
magnesium
brass
nickel
platinum
silver
silicium
steel - blasted SA 2,5
steel - chromated
steel - stainless
steel - galvanised
titanium
zinc (also galvanized materials)
tin
Glass & Ceramic Materials
glass
ceramics
mosaic & tiles
porcelain
emaille
Fabrics & Leather
felt
jute
leather
fleece
Paper & Cardboard
dispersion-coated cardboards
foils
FR2 - synthetic resin bonded paper
coated cardboards
grey board
paper
PE-coated boards
corrugated cardboard
Foundation ground
asphalt
Wood & Timber
veneer
laminate - HPL
cork
solid timber - primed, painted, coated
solid timber - untreated
MDF - medium density fiberboard
multiplex board
OSB - oriented strand board
parquet
Construction materials
concrete & cement
bitumen
insulating materials
gypsum & plasterboard
artificial stones
natrual stones
Size of application area
mm²-/mm³range - precision parts
cm²-/cm³ range - component
m² range - workpiece
Curing mechanisms
moisture curing
Pot life @ +20/23°C - Minimum / minutes
6-15 min
(Mixed) viscosity
thixotropic
Packaging unit
cartridge (1- or 2-part)
temperature resistance <0°C (approx.)
from -40°C
temperature resistance >0°C (approx.)
to +100°C
colour and colour fastness
white
Shore-A
Sh-A 41 to 60
deformation capability
> 300%
Ecological requirements
without hazardous label
VOC-free
Application Types
dot application
line, bead application
casting, sealing
surface coating
chemical anchoring systems
Construction & Finishing Craft / floor
joints & crack repair

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable system that may be available. SUBSTRATEC gives no guarantee that the system suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant manufacturer or supplier. See for further information Terms of Use.