PowerBond 2part MS Polymer

Adhesive Bonding Technology

Through the research & development of MS Polymers a success story in bonding technology has been reinvigorated combining the properties of conventional bonding systems like polyurethanes, silicones and acrylates, without the necessity of keeping their weak points.

The result is a silane hardening, highly viscous and permanently flexible 2 part adhesive and sealant. The MS Polymer is completely free of any hazchem certification and does fullfill even the most stringent Health and Safety directives and is a truly green product for the modern eco friendly work place.

Advantages:

  • Working processes are revolutionised
  • Without primer on many substrates
  • Homogeneous through cure mechanism (from inside to outside) is independent from surrounding temperature or humidity
  • Overpaintability (Wet on wet)
  • No pinholing
  • No hazchem declaration
  • PIF free (Paint Irritation Free)
  • High chemical resistance
  • UV stable, weathering resistant & non aging
  • Odor neutral
Find out more
Voelkel Industrie Produkte GmbH
Adhesive Bonding Technology

Consistent Performance for industrial needs. Exploration of the fast growing automotive aftermarket in the early nineties opened new opportunities in this particular industry.

Contact Form

Features

Adhesive and sealant systems
Adhesive
Sealant
Components
2-part systems
2-part systems
2-part STP - silane modified polymers
Thermoplastics
ABS
PC
PMMA
PS
PUR (lower degree of cross-linking)
PVC (harder perfomance)
PVC (softer perfomance)
Elastomers
EPM/EPDM
Thermosetting Plastics
PUR (higher degree of cross-linking)
Metals
aluminium
cast iron
copper
brass
steel - blasted SA 2,5
steel - stainless
steel - galvanised
zinc (also galvanized materials)
Glass & Ceramic Materials
glass
ceramics
Wood & Timber
solid timber - untreated
Construction materials
concrete & cement
natrual stones
Size of application area
cm²-/cm³ range - component
m² range - workpiece
volumetric
1:1
Curing mechanisms
room temperature curing
chemical curing
Pot life @ +20/23°C - Minimum / minutes
31-59 min
Processability (approx.)
≤ 12 hours
(Mixed) viscosity
pasty
thixotropic
Odor
odorless
Packaging unit
cartridge (1- or 2-part)
sausage
hobbock
temperature resistance <0°C (approx.)
from -40°C
from -30°C
from -20°C
temperature resistance >0°C (approx.)
to +70°C
to +80°C
to +90°C
max temperature exposure short-term
to +120°C
colour and colour fastness
crystal clear
transparent
white
grey
black
Shore-A
Sh-A 41 to 60
gap filling properties
≤ 30mm
deformation capability
> 300%
coatability & paintablilty
water-borne paints
solvent-borne paints/coatings
against substances (non-binding information)
salt water
Ecological requirements
without hazardous label
VOC-free
Mobility - Land Transportation / vehicle exteriors
decorative trims
cladding components
windscreen bondings
Mobility - Land Transportation / vehicle interiors
decorative trims
ceiling, wall, floor elements
Boat & Shipbuilding / interiors
cabin construction
Renewable Energy / solar technology
photovoltaic elements
Construction & Finishing Craft / interior construction
mirror bondings
Construction & Finishing Craft / floor
laminate/lino/pvc
Construction & Finishing Craft / concrete & stone
natural stones

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable system that may be available. SUBSTRATEC gives no guarantee that the system suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant manufacturer or supplier. See for further information Terms of Use.