DINITROL 517 A/B

Adhesive & Sealant

DINITROL 517 A/B is a 2-component high stability polyurethane adhesive suited especially for structural bonding.

The product has a pot life of approx. 12 minutes. The pot life can be easily adjusted; processing times of 5 minutes to 1 hour can be set. Depending on the requirements, curing can be accelerated by heating.

  • High strength
  • Outstanding structural bonding
  • Curing can be accelerated by the application of heat (from 60 minutes down to 5 minutes)
  • Stable bead directly after application
  • Reduced equipping and process times
Find out more
DINOL GMBH
Adhesive Bonding Technology

Protecting, bonding, sealing, repairing: More than 70 years ago, we set standards with the first corrosion protection. Since then, we have worked tirelessly on the high quality of our products in order to exceed the level achieved time and time again.

Contact Form

Features

Adhesive and sealant systems
Adhesive
Sealant
Components
2-part systems
2-part systems
2-part polyurethane
Composites
SMC
Metals
steel - chromated
Size of application area
cm²-/cm³ range - component
m² range - workpiece
Curing mechanisms
room temperature curing
chemical curing
Pot life @ +20/23°C - Minimum / minutes
1-5 min
6-15 min
Processability (approx.)
≤ 30 minutes
(Mixed) viscosity
high viscosity
pasty
Packaging unit
cartridge (1- or 2-part)
hobbock
temperature resistance <0°C (approx.)
from -40°C
from -30°C
from -20°C
colour and colour fastness
brown
Shore-A
Sh-A 81 to 100
Shore-D
Sh-D 61 to 80
deformation capability
≤ 30%
≤ 50%

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable system that may be available. SUBSTRATEC gives no guarantee that the system suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant manufacturer or supplier. See for further information Terms of Use.