DINITROL 771

Adhesive & Sealant

DINITROL 771 is a MS Polymer-based adhesive with a high green strength and extended open time, suitable for elastic bonds.

Due to its high green strength clamping times are reduced, or clamps are not needed at all. It can also be used as sealant, if material of similar stiffenesses are joined, or if mechanical fastening methods are used.

  • Solvent-, isocyanate- und PVC-free
  • No labelling, No hazards symbols
  • Very good UV- resistance and ageing properties
  • Very wide range of adhesion, often without adhesion promoter
  • Neutral, odourless and fast curing
  • Paint compatible with most industrial paint or lacquering systems, both alkyd resin and dispersion-based
  • Can be painted over after skin formation (wet on wet) with the usual paint systems preliminiary tests are essential)
Find out more
DINOL GMBH
Adhesive Bonding Technology

Protecting, bonding, sealing, repairing: More than 70 years ago, we set standards with the first corrosion protection. Since then, we have worked tirelessly on the high quality of our products in order to exceed the level achieved time and time again.

Contact Form

Features

Adhesive and sealant systems
Adhesive
Sealant
1-part systems
1-part STP - silane modified polymers
Components
1-part systems
Size of application area
cm²-/cm³ range - component
m² range - workpiece
Curing mechanisms
room temperature curing
moisture curing
Pot life @ +20/23°C - Minimum / minutes
6-15 min
Pot life @ +20/23°C - Minimum / hours
> 12 h
(Mixed) viscosity
pasty
Odor
odorless
Packaging unit
cartridge (1- or 2-part)
sausage
customized packaging
temperature resistance <0°C (approx.)
from -40°C
from -30°C
from -20°C
temperature resistance >0°C (approx.)
to +100°C
to +100°C
to +120°C
max temperature exposure short-term
to +180°C
colour and colour fastness
white
black
Shore-A
Sh-A 41 to 60
coatability & paintablilty
wet-on-wet
Ecological requirements
without hazardous label
VOC-free
Application Types
line, bead application

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable system that may be available. SUBSTRATEC gives no guarantee that the system suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant manufacturer or supplier. See for further information Terms of Use.