DINITROL PVC PA 28302

Adhesive & Sealant

Solvent-free PVC seam sealing. DINITROL PVC PA 283 02 is a PVC-Epoxy-Blend Plastisol (solvent-free) for medium solid metal adhesion (e.g. frame at engine hood and trunk lid).

For EC washing resistance, the material must be dry/hardened in a ventilated oven with a minimum temperature of 160 °C and a maximum temperature of 200 °C (for ± 20 minutes).

  • Hot-curing, solvent-free sealant
  • No need to pre-cure the product before powder coating
  • High heat resistance and mechanical resistance
  • Highly suitable for retaining the texture of powder coating
  • Outstanding filler
  • Fast further processing
Find out more
DINOL GMBH
Adhesive Bonding Technology

Protecting, bonding, sealing, repairing: More than 70 years ago, we set standards with the first corrosion protection. Since then, we have worked tirelessly on the high quality of our products in order to exceed the level achieved time and time again.

Contact Form

Features

Adhesive and sealant systems
Adhesive
Sealant
1-part systems
1-part polyurethane
Components
1-part systems
Metals
steel - galvanised
Size of application area
cm²-/cm³ range - component
m² range - workpiece
Curing mechanisms
warm-/hot curing
Processability (approx.)
≤ 30 minutes
(Mixed) viscosity
medium viscosity
Packaging unit
cartridge (1- or 2-part)
sausage
hobbock
colour and colour fastness
grey
Shore-A
Sh-A 41 to 60
OEM specifications
OPEL spezification L000 0406
Ecological requirements
VOC-free
Mobility - Land Transportation / vehicle exteriors
engine hood
trunk lid

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable system that may be available. SUBSTRATEC gives no guarantee that the system suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant manufacturer or supplier. See for further information Terms of Use.