Corrosion Protection - DINITROL 77B

Coating Technology

DINITROL 77B DINITROL 77 B is a corrosion preventive fluid, designed for long-term protection against corrosion and, due to its residual hard film affords some protection against mechanical wear.

DINITROL 77B is a corrosion protection fluid for long-lasting protection against corrosion, which also offers a certain level of protection against mechanical wear due to the remaining hard film.

The product contains environmentally friendly, low-aromatic solvents that leave a thick brown waxy film after evaporation. DINITROL 77B was primarily developed for cavity sealing, but is also suitable for long-lasting protection during storage and transport as well as for underbody protection.

The recommended application temperature for the product and the object in question is between 15 and 30 °C.

  • Low dry film thickness with high corrosion inhibition effect
  • Diverse options for application
  • Large-scale applications, adapted for Airless pump technology
Find out more
DINOL GMBH
Adhesive Bonding Technology

Protecting, bonding, sealing, repairing: More than 70 years ago, we set standards with the first corrosion protection. Since then, we have worked tirelessly on the high quality of our products in order to exceed the level achieved time and time again.

Contact Form

Features

Subsurface preparation / subsurface set-up and rehab
body-cavity sealing
Surface pretreatment / chemical, electrochemical
corrosion protection
Coating systems / organic systems
polymer coating
Chemistry - Coatings
1-parts systems
Chemical basis
wax, resin
Metals
aluminium
cast iron
copper
brass
steel
Size of application area
mm²-/mm³range - precision parts
cm²-/cm³ range - component
m² range - workpiece
Curing mechanisms
room temperature curing
moisture curing
Tack free time (approx.)
≤ 1 min
Pot life @ +20/23°C - Minimum / minutes
1-5 min
Processability (approx.)
≤ 30 minutes
≤ 60 minutes
(Mixed) viscosity
low viscosity
Packaging unit
tube, can, canister
aerosol can
hobbock
max. (dry) film thickness
DFT < 50µm
temperature resistance <0°C (approx.)
from -30°C
from -20°C
temperature resistance >0°C (approx.)
to +80°C
to +90°C
to +100°C
colour and colour fastness
translucent
salt spray test
DIN EN ISO 9227
chassis & vehicle superstructures
wheel arches
underbody
Mobility - Land Transportation / vehicle exteriors
cavities doors, frame members

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable system that may be available. SUBSTRATEC gives no guarantee that the system suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant manufacturer or supplier. See for further information Terms of Use.