DINITROL 520

Surface Treatment

Glass activator for pretreatment during window replacement in the automotive sector.

The glass activator DINITROL 520 is a solvent-based adhesion promoter used in combination with DINITROL glass primers for direct glazing in the automotive industry.

In combination with the primer DINITROL 530, the activator DINITROL 520 improves the adhesion on glass and lacquers.

  • Cleaning agent for bonding surfaces
  • Outstanding activator for the replacing of windscreens (together with DINITROL 530) and on metal and plastic (together with DINITROL 550)
  • Supports the long-term safety of windscreens with DINITROL adhesives
  • No labelling and training obligation according to Reach Regulation 1907/2006 as < 0.1 % monomeric diisocyanates
Find out more
DINOL GMBH
Adhesive Bonding Technology

Protecting, bonding, sealing, repairing: More than 70 years ago, we set standards with the first corrosion protection. Since then, we have worked tirelessly on the high quality of our products in order to exceed the level achieved time and time again.

Contact Form

Features

Surface pretreatment / chemical, electrochemical
priming
Components
1-part systems
Glass & Ceramic Materials
glass
Size of application area
mm²-/mm³range - precision parts
cm²-/cm³ range - component
Curing mechanisms
room temperature curing
moisture curing
Pot life @ +20/23°C - Minimum / seconds
31-59 sec
Processability (approx.)
≤ 5 minutes
(Mixed) viscosity
low viscosity
Packaging unit
small packaging unit (can, tube, etc.)
colour and colour fastness
transparent
Mobility - Land Transportation / vehicle exteriors
windscreen bondings

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable system that may be available. SUBSTRATEC gives no guarantee that the system suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant manufacturer or supplier. See for further information Terms of Use.