Merbenit E20

Adhesive Bonding Technology

With a density of 0.70 g/cm³ Merbenit E20 is much lighter than other products. This permanent elastic adhesive and sealant based on SMP is suitable for many industry and automotive applications.

Other special features are the noise insulating and vibration damping properties.

Product advantages

  • Very low density
  • Low thermal conductivity
  • Noise insulating and vibration damping
  • Compressible
  • Simple processing
  • Tolerance compensating
  • Permanently elastic and stress compensating
  • Free of solvents, isocyanates and silicones
Find out more
merz+benteli AG
Adhesive Bonding Technology

Sense today what is needed tomorrow, develop today what must stand the test of time: Quality is the priority of merz+benteli ag.

Contact Form

Features

Sector expertise
Manufacuting industry
Adhesive and sealant systems
Adhesive
Sealant
1-part systems
1-part STP - silane modified polymers
Components
1-part systems
Thermoplastics
ABS
ASA
EPS
PA
PA (PA 6)
PA (PA 6.6)
PA (PA 12)
PC
PET
PMMA
PPE
PUR (lower degree of cross-linking)
PVC (harder perfomance)
PVC (softer perfomance)
SAN
SB
XPS (rigid foam)
Elastomers
CR
EPM/EPDM
NBR
NR
SBR
Thermosetting Plastics
EP
HPL
MF
PF
PUR (higher degree of cross-linking)
UP
Composites
BMC
FR4
GRP
SMC
Metals
aluminium
plumb
chromium
cast iron
copper
magnesium
magnets
brass
nickel
steel - blasted SA 2,5
steel - chromated
steel - stainless
steel - galvanised
zinc (also galvanized materials)
tin
Glass & Ceramic Materials
glass
ceramics
ceramic (techno-)
mosaic & tiles
porcelain
emaille
Construction materials
concrete & cement
insulating materials
engineered stone
gypsum & plasterboard
artificial stones
natrual stones
Wood & Timber
veneer
laminate - HPL
laminate - CPL
cork
solid timber - primed, painted, coated
solid timber - untreated
MDF - medium density fiberboard
multiplex board
OSB - oriented strand board
Size of application area
cm²-/cm³ range - component
m² range - workpiece
Curing mechanisms
moisture curing
Pot life @ +20/23°C - Minimum / minutes
31-59 min
(Mixed) viscosity
solid
Packaging unit
bag
temperature resistance <0°C (approx.)
from -40°C
temperature resistance >0°C (approx.)
to +80°C
colour and colour fastness
colour spectrum bright
white
Shore-A
Sh-A 21 to 40
deformation capability
≤ 300%
Ecological requirements
VOC-free

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable system that may be available. SUBSTRATEC gives no guarantee that the system suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant manufacturer or supplier. See for further information Terms of Use.