TR 60 LCD

Dosing and Processing Technology

With the TR 60 LCD hot spray system you can process hot melt adhesives in the form of granules, pads or 43mm sticks as contactless spray application. The device can be converted for dot / bead application.

The TR 60 LCD is a hot-melt adhesive spray system. Spray application is a non-contact glue application, which means it goes easy on the materials that are about to be glued. Also, spray application allows covering great areas and using very little glue. A stand for storing with built in pressure regulator and manometer is part of the system and permanently attached to the TR 60 LCD, so setting the right glue output and spray pattern becomes very easy. The hot-melt adhesive is extruded through air pressure. Pneumatic glue guns increase work speed and simplify exact dosing of the glue. Thanks to the built in electronic temperature regulation the glue gun is ready to work within 3 to 10 minutes. Furthermore, it keeps the temperature on a constant level thus is a perfect suit for processing temperature-sensitive hotmelt glue. The LCD-display and push-buttons allow a precise temperature adjustment. This way, the user always knows the current temperature of the glue applicator and is able to apply the glue at the intended temperature. The TR 60 LCD hot-melt glue gun can be loaded with granulate, pillows and 43 mm slugs. It offers maximum flexibility for choosing the right glue and lets you benefit from cost-advantages ofdifferent shapes of hot-melt. The capacity of 250 ml is sufficient for numerous gluings. The TR 60 LCD can be switched to dot- and lineapplication with an adapter. The number of possible application patterns is widely extended by the Reka nozzle range. Almost all of the offered nozzles can be used with every Reka glue gun in combination with a separate adapter.

Find out more
Reka Klebetechnik GmbH & Co. KG
Dosing and Processing Technology

Reka Klebetechnik is specialist for handheld hot-melt glue guns.

Contact Form

Features

Dispensing and application systems
Dispensing adhesives and sealants
Coating Application
Size of application surface
cm²-/cm³ range - workpieces
m² range - components
Degree of automation
manuel application
mobile devices
Application Types
dispensing - conctactless
dot application
line, bead application
spray application
Material Feeding / drive system
pneumatic
Material Feeding / Packaging unit
sticks/ blocks/ granulate
application guns
1-part dispensing guns
Max processing temp.
to +210°C
pressure range (d.o. speed , visc.)
≤ 10 bar
Components
1-part systems
Curing mechanisms
hot melting process

The search results from SUBSTRATEC are not sales recommendations and/or professional technical advice. It is only intended to make it easier for the user to pre-select suitable system that may be available. SUBSTRATEC gives no guarantee that the system suggested is successful or suitable for the specific area of application of the user. In the event of any questions regarding the use and suitability for the specific application, the user has the possibility to directly contact the respective technical contact person of the relevant manufacturer or supplier. See for further information Terms of Use.

Information Desk